Products -> Sensors

Untitled Document

Historic

Pilosophy

Links

Home

Products -> SENSORS ^() Sorry for the inconvenience, we are upgrading our WEB site.
	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation »» SEL-SV-F2-K4 Used in gas burners, oil or coal, or any other fuel, whose flame is capable of producing pulsed infrared emission, and the basic performance of the sensor facing the flicker of the flame. When fed, 90-250V AC, runs automatically adjusting the internal circuitry of discrimination of the spurious emissions, in the environment of view of the flame. It has a flat or convex lens, to protect the environment and the enhanced vision flame, respectively. Degree of protection IP 55. Connection to the burner in 1 "RP. Working temperature: -25 to +100ºC. Excellent cost/benefit. See specifications and order codes: »» SEL-SV-F5-K4 Used in gas burners, oil or coal, or any other fuel, whose flame is capable of producing pulsed infrared emission, and the basic performance of the sensor facing the flicker of the flame. When fed, 90-250V AC, runs automatically adjusting the internal circuitry of discrimination of the spurious emissions, in the environment of view of the flame. It has a flat or convex lens, to protect the environment and the enhanced vision flame, respectively. Degree of protection IP 55. Connection to the burner in 1 "RP. Working temperature: -25 to +70ºC. Excellent cost/benefit. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-HT-C Electrode for flame sensor (ionization) or ignition. With or without securing thread, with or without protective cover. 120 mm porcelain and 500 mm free length of the electrode / 50 mm porcelain and 140 mm free length of the electrode. SEL-HT-E Sensors and electrodes assembled as required by the client’s drawing or sample – SPECIAL. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-L1-K4 Sensor used to indicate the presence of flame in burners of any fuel type that emits visible radiation. For any industrial or commercial application and voltage, in dark combustion chamber - For non-continuous operation. IP 55. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-U0-011-K0 Ultraviolet sensor. For any industrial or commercial application and voltage under 120 KW (100,000 Kcal/h), for non-continuous operation. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-U0-021-K4 Ultraviolet sensor with flat quartz lens; IP 55. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-U3-011-K2 Ultraviolet sensor. For any industrial or commercial application (voltage under 120 KW) - For non-continuous operation. Operating temperature: -20ºC to +125ºC. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-U0-022-K4 - SEL-SV-U3-022-K4 Ultraviolet sensor. For any industrial or commercial application and voltage - For non-continuous operation. IP 55. See specifications and order codes:

	FLAME DETECTOR SENSOR FOR BURNER Intermittent Operation SEL-SV-UL-K4 Ultraviolet and visible light sensor. For any industrial or commercial application and voltage - For non-continuous operation. Flat or Convex Lens. IP 55. See specifications and order codes:

	CONVEYER SENSOR OF SIGNAL FLAME DETECTION Continuous Operation * CenPRA Certified by the Ministry of Science and Technology under 2007/225p SEL-SV-K6 Sensor/Transmitter of flame presence signal. Recommended for systems with mono or multiburners. For any industrial or commercial application and voltage - Ultraviolet or visible light - For continuous operation. With fault self-checking. Flat or Convex Lens. IP 66. See specifications and order codes: See Certificate CenPRA:

	CONVEYER SENSOR OF SIGNAL FLAME DETECTION Continuous Operation * Certified by TÜVRheinland under paragraph MC, AEX-1324 - Resion 09 * Meets INMETRO Ordinance No. 83 of 04.03.2006 SEL-SV-K7 Sensor/Transmitter of flame presence signal. Recommended for systems with mono or multiburners. For any industrial or commercial application and voltage - Ultraviolet or visible light - For continuous operation. With fault self-checking. Flat or Convex Lens. Explosion-Proof (Br Ex d II BT6). See specifications and order codes: See Certificate TÜVRheinland:

	CONVEYER SENSOR OF SIGNAL FLAME DETECTION Continuous Operation SEL-SV-MCQ-K6 Sensor/Transmitter for systems with mono or multiburners of any type and voltage - For continuous operation - Equipped with two sensors: one ultraviolet sensor and one infrared sensor. With fault self-checking – Communication via RS-485-1 – Separate digital sensitivity setup. Monitors the last 8 event occurrences. IP 66. See specifications and order codes:

	CONVEYER SENSOR OF SIGNAL FLAME DETECTION EXPLOSION PROOF Continuous Operation * Certified by TÜVRheinland under paragraph MC, AEX-1656 - Revision 05 * Meets INMETRO Ordinance No. 83 of 04.03.2006 SEL-SV-MCQ-K7 Sensor/Transmitter for systems with mono or multiburners of any type and voltage - For continuous operation - Equipped with two sensors: one ultraviolet sensor and one infrared sensor. With fault self-checking – Communication via RS-485-1 – Separate digital sensitivity setup. Monitors the last 8 event occurrences. Explosion-Proof (Br Ex d II BT6). See specifications and order codes: See Certificate TÜVRheinland: